济南仓储货架安装完验收要做好细节

2017-07-17  来自: 山东汇德宝仓储设备制造有限公司 浏览次数:217

1、检查立柱和横梁是否弯曲变形

1. Check whether the column and the crossbeam are bent or deformed

立柱和横梁是仓库货架重要的两个组件,且较长,需要物流车运输到现场,如果包装不严谨,很可能会出现弯曲变形或表面破损的,验收的时候一定要注意。

The post and beam is warehouse shelves two components, important and long, the logistics car transported to the site, if the package is not rigorous, is likely to be damaged or the bending deformation of the surface of the acceptance to the attention of the time.

2、检查表面焊缝是否存在缺陷

2. Check surface welds for defects

仓库货架表面焊缝是比较考验货架厂商生产能力的,一定要均匀才好,并且不能出现裂纹、夹渣、焊瘤、烧穿、弧坑和针状气孔等缺陷,验收时候一定要仔细观察。

Warehouse shelves surface weld is the comparison test of production capacity of shelves manufacturers, must be uniform and not just good, cracks, slag, overip, burn, craters and needle like pores, acceptance must be carefully observed.

3、检查表面喷涂质量

3. Check the surface spraying quality

济南仓储货架表面喷塑不仅为了美观,还起很好的保护作用,表面处理的不好很容易看出来,有的也可以用锤子轻轻敲打看是否有脱落的现象(一定不能太用力)。

Warehouse shelves surface is not only for beauty, but also has a good protective effect, surface treatment is very easy to see, some can also be used to see whether there is a hammer to tap off phenomenon (must not be too hard).


山东汇德宝仓储设备制造有限公司

固定电话:0531-88110651  公司传真:0531-88902004 服务热线:王经理:13969148511

公司地址:山东省济南市北园大街26号全福立交桥西行300米路南

生产厂址: 山东省济南市历城区荷花路街道霍家流一村30号


CopyRight © 版权所有: 山东汇德宝仓储设备制造有限公司 技术支持:山东汇德宝集团 网站地图 XML


扫一扫访问移动端