轻型货架的优越性及适用范围

2018-03-14  来自: 山东汇德宝仓储设备制造有限公司 浏览次数:287

轻型货架是非常经济实用方便的一款仓库货架,因其载重量较轻,故常称为轻型货架.货架是由三种构件:立柱片、横梁、层板组成.轻型货架整体采用无螺钉组合式设计,安装拆卸方便快捷.适合存放一些轻质小件货品,是层板货架的一种.轻型货架的结构与中型相同,可自同拆装,层高以5cm间距可自由调节,只是其材料规格相对较小,承载量也相对较小,此种轻型货架价格相对经济,结构相对万能角钢货架要稳定牢靠,在1500cm跨度内,可承载100-200kg.表面采用喷塑处理,美观整洁.

Light shelf is very economical and practical convenience of a warehouse shelves because of its weight is light, is often called the light shelf. The shelf is composed of three components: the column, beam and plate components. The whole light shelf with no screw combined design, convenient installation and disassembly. Suitable for storing some small lightweight goods is a kind of multilayer shelf structure. Light shelves and medium, can be from the same height to disassembly, 5cm spacing can be adjusted freely, but the material specification is relatively small, the carrying amount is relatively small, the price is relatively light shelf economic structure is relatively stable to universal shelf, in the span of 1500cm, bearing the surface of 100-200kg. by spray treatment, clean and beautiful.

轻型货架属于济南仓储货架的一种,搁板货架类型.是按货架的承载量来区分与命名的.按照这个划分原则轻型货架在所有仓储货架中的承载量是较小的.通常货架承载≦150kg/层(货架载荷绝大多数是以层为单位的承载量计算).

A light shelf belongs to the Ji'nan storage shelves, shelf shelf type. According to the bearing capacity of the racks to distinguish and name. According to the principle of dividing light shelf capacity in all storage shelves in the smaller. Usually shelves bearing less than 150kg/ layer (most shelf load is calculated on a layer of capacity unit the).

轻型货架的优越性:

The advantages of light shelf:

1.轻型货架采用万能角钢为立柱,层板可配置钢、木层板,层高以50mm为节距任意调节.拆装方便,外形美观,可任意组合,用途广泛,成本低廉;

1. light duty rack adopts universal angle steel as the column, and the laminate can be configured with steel and wood laminates. The height of the storey can be adjusted arbitrarily with 50mm as the pitch. It is easy to assemble and disassemble, beautiful in appearance, and can be combined arbitrarily, with wide usage and low cost.

2.轻型货架层板采用加强筋焊接,层载能力大,在相对长度下每层最大层载能达到200kg/层;

2. light shelf laminates are welded with stiffeners, with large loading capacity, and the maximum load of each layer reaches 200kg/ layer under the relative length.

3.轻型货架顶部与底部层板与立柱采用角码加螺栓连接,安全稳固,中间层板则采用专用插销与层板连接,简单方便,并可任意调节.

3. light shelves of top and bottom plate and the column uses the corner with bolt connection, safety and stability, the middle plate is used with special plate bolt connection, simple and convenient, and can be adjusted.

轻型货架适用范围:

Light shelf application range:

1.轻型冲孔角钢是一种通用性极强的型材,广泛应用于轻型货架、车间工作台、工具车、悬挂系统、安全防护网及支撑骨架等场合;

1., light punching angle steel is a widely used profile, widely used in light shelving, workshop workbench, tool car, suspension system, safety protection network and support skeleton.

2.适合小零件、配件等较轻的工作场所,以人力、手工搬运、存储及拣选作业为主.

2. suitable for small parts, accessories and other lighter workplaces, mainly by manpower, manual handling, storage and sorting.

山东汇德宝仓储设备制造有限公司

固定电话:0531-88110651  公司传真:0531-88902004 服务热线:王经理:13969148511

公司地址:山东省济南市北园大街26号全福立交桥西行300米路南

生产厂址: 山东省济南市历城区荷花路街道霍家流一村30号


CopyRight © 版权所有: 山东汇德宝仓储设备制造有限公司 技术支持:山东汇德宝集团 网站地图 XML


扫一扫访问移动端